After you installed DC++ start program
In the FILE option find the SETTINGS and click on it. This window will open.
Type in: your (1) NICK (fake name) in the required window. Select connection speed (2) Click on (4) PASSIVE if you have a router (firewall) or just running a modem. If you have a FIXED IP click on ACTIVE (3) in the Connection Settings the WAN IP (if you have a router go to browser, open router IP and get number in STATUS)
Click OK
Kad ste instalirali DC++ otvorite program.
U FILE opciji odaberite SETTINGS i u prozoru upisite (1) NICK (neko fiktivno IME). Odaberite brzinu prenosa u (2) Connection Kliknite na (4) PASSIVE ako koristite router i zastitni zid (firewall) Ako imate FIKSNI IP u Connective Setting prozoru kliknite na (3) ACTIVE i upisite WAN IP koji imate iz routera. Ako nemate broj mozete ga naci ako odete u router preko browsera i nadjete broj u opciji STATUS.
Kliknite OK
After IP number setup DC. Click on Downloads tab, clik on browse and select a directory for your download files.
Click OK
Posle upisa IP adrese predjite na ostale instrukcije. Kliknite na Downloads tab i kad se otvori pomocu brows opcije nadjite direktorijum gde cete pohraniti fajle koje skinete sa DC-a Kliknite OK
Click on the Sharing tab
click on (1) the Add button to add a shared folder in which you have to have the data to share (most hubs requier several Gb!)
Click on Add Folder, Select folder and then hit OK. You will see the Dir listed (2) (here select the dir where you have the programs, music, movies, wou want to share with others) Click OK. You will see the Dir. listed (2). Set speed (3) for others to open extra slot if thay need it. Set upload slots (4), min 2-3 because hub can prevent you to connect if your number of upload slots is low.
Click OK
Kliknite zatim na Sharing tab.
Pratite instrukcije kako postaviti Shared direktorijum u kojem trebate imati minimalno od 100 Mb do 2 Gb a postoje mrezne grupe koje zahtevaju 10 i vise Gb podataka da delita sa ostalim clanovima da bi moglu uci na tu mrezu. Vecina foruma zahtevaju nekoliko Gb!
Kliknite na (1) Add Folder. Otvorice se prozor u kojem mozete odabrati Direktorijum koji ima podatke koje cete deliti sa ostalima (gde se nalaze programi, muzika, filmovii sl.) kliknite OK Dir ce se pojaviti na listi (2)
To connect to favorite hub you have to setup Favorite Hubs. Click on STAR
Da se povezete sa omiljenim forumom morate instalirati podatke u Favorite Hubs. Kliknite na ZVEZDU
Fill in the data in the window and hit OK
Upisite podatke u prozorcice i kliknite na OK
You will se the hub name on the line under Auto connect / Name. if you check the little box next to it the system will log in automatically when you start DC++) Click and highlight the hub and click on CONNECT
Videcete ime foruma na listi (ako kliknete na kockicu do imena, sistem ce auto startovati forum kad pokrenete DC++ program) Kliknite na ime foruma da ga oznacite (zatamni) i kliknite na CONNECT
If everything is correct the system should run and log into the hub.. You should see a screen like this.
Ako je sve programirano i postavljeno kako treba onda bi se trebala pojaviti slicna slika na ekranu
Right click on user name in the right window and select (1) Get file list.
When the user list opens, check the list and double click on a file you want to downlaod (you can click on a Directory FOLDER and download a complete folder) RIGHT click and select Download
( If the system is not downloading the list (takes few seconds) it can happen that the router got a new IP address from the main ISP server. GO TO ROUTER (http://192.168.1.1) go to STATUS and copy/paste the WAN IP from router to DC++ SETUP screen!
DO NOT FORGET THIS because otherwise it will not work.
Sometimes the PASSIVE option works also but this is better.
All the best and good luck! --- Sve najbolje i srecno
Kliknite na ime korisnika sa liste u DESNOM delu prozora i odaberite opciju (1) Get file list.
Kad se lista otvorila, pogledajte je i odaberite fajle ili ceo direktorijum koji zelite prebaciti (kliknite dva puta da oznacite taj fajl ili dir) Desnim tasterom misa klinite na fajlu ili dir i kad se otvori prozor odaberite opciju Download
(Ako imate rauter i ako sistem u roku od par sekundi ne pocne skidati listu onda je moguce da je router dobio novu IP adresu od glavnog servera vaseg internet centra. Idite u router (http://192.168.1.1) i to u STATUS i tamo prekopirajte - copy/paste WAN IP adresu i unesite je u DC++ FIle/Settings opciju. Tu zamenite stari broj za novi. )
NEMOJTE OVO ZABORAVITI jer bez IP adrese prenos podata ne radi.
Nekad PASSIVE opcija radi bolje ali ne uvek.
DC++ Installation and Setup
Download DC++ v0.25 Skinite DC++ ovde
New version - nova verzija DC++ v0.24
1. Point to a Directory where you will downlaod files from DC.
2. Open few slots (most of the hubs require min number of 2-3 plus as many hubs you are connected to.
3. Set speed to 10-20 Kb/s
1. Upisite ime direktorijuma u koji cete pohraniti sve programe koje skidate sa DC.
2. Otvorite dovoljan broj ulaza (slot) jer vecina mreza zahteva minimum od 2-3 plus dodatne ako ste ukljuceni u vise od jedne mreze. DC++ vam dozvoljava da se ukljucite i budete clan vise mreznih grupa (hubs) u isto vreme.
3. Tu mozete po izboru upisati 10-20 Kb/s
Oznacite brzinu prenosa na kojoj ce drugi moci otvoriti dodatni ulaz ako ima zatreba (3)
Postavite broj izlaza (4) da bi drugi mogli skidati programe od vas. Mali broj moze usloviti da vam druge mrezne grupe ne dozvole ulaz. Zato postavite bar 2-3
How to USE DC++?
Kako koristiti DC++?
When you installed DC++ and connected to a hub you will find a user list shown below. In the right part of the window is the 1) Nick - user name 2) How much data is Shared 3) Description 4) Users connection speed and (5) his optional e-mail address. You can sort on any of the listed options. It is good to sort on Connection speed to select fast links, or on Shared to go where there is lots of data. If you find a user data you would like to check Right-click on the user name and left click on Get file list in the pull-down window. You can also send a personal messege to the user via Send private messege
Kad ste zavrsili intalaciju DC++ i usli na neki hub pojavice se lista korisnika kao sto je prikazano na slici dole. U prozoru ce biti 1) Nick - nadimak korisnika 2) Koliko podataka deli - Shared 3) Njegov opis -Description 4) Brzina kojom je korisnik prikljucen na hub i 5) njegova e-mail adresa. Ako dva puta kliknete na bilo koju kolonu (Nick, Shared, Connection) sistem ce sortirati tu kolonu. Poredjati konekciju po brzini moze biti od pomoci (Connection) kao i po velicini koliko se deli na hub-u. Ako vam se podaci nekog korisnika ucine interesantnim, kliknite desnim tasterom misa na njegovo ime i otvorice se prozor u kojem levim tasterom kliknite na Get file list U istom prozoru mozete poslati i poruku korisniku putem Send private messege.
Get file list option will download the users shared file list
Get file list ce presnimiti korisnikovu listu
You can brows the file list just like in Windows Explorer. If you would like to download a directory or a file, first SELECT! it by clicking on it ONCE and then Right-click on it. A pull down menu will open. Left Click on Download.
Data download will start
REMEMBER: All your downloaded files are in your Dowload directory you selected in Settings!!
Podatke mozete pregledati (kao u Windows Explorer-u) Ako vam se neki direktorijum ili program dopada i pozelite da ga presnimite 1) prvo ga SELEKTUJTE! kliknuvsi na njega JEDANPUT (poplavice naslov) pa onda 2) Desnim tasterom klinite da se otvori prozor sa opcijama a onda Levim tasterom kliknite na Download.
Presnimavanje ce krenuti u roku od par sekundi
ZAPAMTITE: Svi podaci i programi koje presnimite nalazi ce se u vasem Download direktorijumu kojeg ste odredili u Settingu!!
If you get this messege - No slots available there are too many people on that users link. You can leave the system on and when a slot is available the system will download your files.
Poruka - No slots available znaci da korisnik ima maksimalan broj korisnika na njegovom sistemu. Ako ostavite kompjuter ukljucen on ce automatski poceti presnimavanje cim slot - ulaz postane slobodan
Most files downloaded from DC++ are RAR,ZIP, ISO or other types that need aditional processes in order to be installed on your system. It is good to have WinRAR and WinZIP (latest versions!) as well as WinISO. Also have a good CD burning software like Nero or FireBurner to burn CUE, BIN or ISO files (those are program CD image files.
Most images, file directories contain files like in the sample 1) Program install file 2) File data (NFO) You can open this file in Notepad. Many times this file contains the installation SERIAL number! 3) Keygen (also Crack or Patch file!) The Keygen can be started anywhere in order to generate a serial number for the software you installing but Cracks and Patches should be copied to the program Installation directory usualy in the C: Program FIles/”Program name” directory where the EXE file is located. In order to crack a program you have to extract (or copy) the crack file to the program directory and RUN it from there (click to start the crack) They change the EXE file making them full working (registered) programs.
Vecina direktorijuma i programa na DC++ su tipa RAR,ZIP, ISO fajle koji se moraju dodatnim procesom dekodirati da bi se mogli instalirati. Dobro je imati programe kao sto su WinRAR i WinZIP (najnovije verzije!) kao i WinISO. Dobro je isto imati program za przenje CD-a kao Nero ili FireBurner da bi se mogli snimiti CUE, BIN ili ISO fajle (to su komprimovane kopije originalnih programskih diskova koji kad se sprze na disk daju originalne instalacione diskove istih programa.
Vecina kompresovanih fajli ili direktorijuma imaju sledece u sebi. 1) Instalacioni program (EXE) ili Setup 2) Podatke o programu (NFO, TXT) Njih mozete otvoriti u Windows Notepad-u . Cesto se u njima krije SERIJSKI broj podatak potreban za instalaciju progrma. 3) Keygen (Crack ili Patch file!) Key - generator kljuca se moze startovati bilo gde da bi se dobio serijski broj programa dok se Crack i Patch fajle MORAJU KOPIRATI u direktorijum gde je program instaliran. Znaci PROGRAM SE PRVO INSTALIRA pa se krek prekopira u radni direktorijum (gde se nalazi radni EXE fajl.) To je skoro uvek u C: Program FIles/”program” direktorijum. Tu pokrenite krek fajl koji ce promeniti radni program (EXE) i uciniti ga da bude registrovan ili iz Demo verzije pretvori da bude Radna verzija.